Samba

Protecting an unpatched Samba server

This following instructions will help provide your Samba server some protection against security vulnerabilities if you are unable to (or until you are able to) upgrade to the patched version. Even if you do upgrade you might like to thinkabout the suggestions here to provide you with additional levels of protection.

Limiting the number of concurrent connections

Samba is able to limit the number of concurrent connections when smbd is launched as a daemon (not from inetd). The 'max smbd processes' smb.conf option allows Administrators to define the maximum number of smbd processes running at any given point in time. Any further attempts from clients to connect to the server will be rejected.

Using host based protection

In many installations of Samba the greatest threat comes for outside your immediate network. By default Samba will accept connections from any host, which means that if you run an insecure version of Samba on a host that is directly connected to the Internet you can be especially vulnerable.

One of the simplest fixes in this case is to use the 'hosts allow' and 'hosts deny' options in the Samba smb.conf configuration file to only allow access to your server from a specific range of hosts. An example might be:

    hosts allow = 127.0.0.1 192.168.2.0/24 192.168.3.0/24
    hosts deny = 0.0.0.0/0

The above will only allow SMB connections from 'localhost' (your own computer) and from the two private networks 192.168.2 and 192.168.3. All other connections will be refused connections as soon as the client sends its first packet. The refusal will be marked as a 'not listening on called name' error.

Using interface protection

By default Samba will accept connections on any network interface that it finds on your system. That means if you have a ISDN line or a PPP connection to the Internet then Samba will accept connections on those links. This may not be what you want.

You can change this behavior using options like the following:

    interfaces = eth* lo
    bind interfaces only = yes

that tells Samba to only listen for connections on interfaces with a name starting with 'eth' such as eth0, eth1, plus on the loopback interface called 'lo'. The name you will need to use depends on what OS you are using. In the above I used the common name for ethernet adapters on Linux.

If you use the above and someone tries to make a SMB connection to your host over a PPP interface called 'ppp0', they will get a TCP connection refused reply. In that case no Samba code is run at all as the operating system has been told not to pass connections from that interface to any process.

Using a firewall

Many people use a firewall to deny access to services that they don't want exposed outside their network. This can be a very good idea, although I would recommend using it in conjunction with the above methods so that you are protected even if your firewall is not active for some reason.

If you are setting up a firewall then you need to know what TCP and UDP ports to allow and block. Samba uses the following:

    UDP/137    - used by nmbd
    UDP/138    - used by nmbd
    TCP/139    - used by smbd
    TCP/445    - used by smbd

The last one is important as many older firewall setups may not be aware of it, given that this port was only added to the protocol in recent years.

Using a IPC$ share deny

If the above methods are not suitable, then you could also place a more specific deny on the IPC$ share that is used in the recently discovered security hole. This allows you to offer access to other shares while denying access to IPC$ from potentially untrustworthy hosts.

To do that you could use:

    [ipc$]
        hosts allow = 192.168.115.0/24 127.0.0.1
        hosts deny = 0.0.0.0/0

this would tell Samba that IPC$ connections are not allowed from anywhere but the two listed places (localhost and a local subnet). Connections to other shares would still be allowed. As the IPC$ share is the only share that is always accessible anonymously this provides some level of protection against attackers that do not know a username/password for your host.

If you use this method then clients will be given a 'access denied' reply when they try to access the IPC$ share. That means that those clients will not be able to browse shares, and may also be unable to access some other resources.

I don't recommend this method unless you cannot use one of the other methods listed above for some reason.

Upgrading Samba

Of course the best solution is to upgrade Samba to a version where the bug has been fixed. If you wish to also use one of the additional measures above then that would certainly be a good idea.

Please check regularly on samba.org for updates and important announcements.

Donations


Nowadays, the Samba Team needs a dollar instead of pizza ;-)

Beyond Samba

Commercial Support

Global · By Country

Conferences

sambaXP by SerNet

SDC by SNIA

Releases

Current stable release

Samba 4.19.5 (gzipped)
Release Notes · Signature

Release History

Versions & Notes

Maintenance

Patches · Security Updates · GPG Key

Future

Release Planning · Roadmap