Name

pam_winbind — PAM module for Winbind

DESCRIPTION

This tool is part of the samba(7) suite.

pam_winbind is a PAM module that can authenticate users against the local domain by talking to the Winbind daemon.

SYNOPSIS

Edit the PAM system config /etc/pam.d/service and modify it as the following example shows:

			    ...
			    auth      required        pam_env.so
			    auth      sufficient      pam_unix2.so
			+++ auth      required        pam_winbind.so  use_first_pass
			    account   requisite       pam_unix2.so
			+++ account   required        pam_winbind.so  use_first_pass
			+++ password  sufficient      pam_winbind.so
			    password  requisite       pam_pwcheck.so  cracklib
			    password  required        pam_unix2.so    use_authtok
			    session   required        pam_unix2.so
			+++ session   required        pam_winbind.so
			    ...
		

Make sure that pam_winbind is one of the first modules in the session part. It may retrieve kerberos tickets which are needed by other modules.

OPTIONS

pam_winbind supports several options which can either be set in the PAM configuration files or in the pam_winbind configuration file situated at /etc/security/pam_winbind.conf. Options from the PAM configuration file take precedence to those from the configuration file. See pam_winbind.conf(5) for further details.

debug

Gives debugging output to syslog.

debug_state

Gives detailed PAM state debugging output to syslog.

require_membership_of=[SID or NAME]

If this option is set, pam_winbind will only succeed if the user is a member of the given SID or NAME. A SID can be either a group-SID, an alias-SID or even an user-SID. It is also possible to give a NAME instead of the SID. That name must have the form: MYDOMAIN\mygroup or MYDOMAIN\myuser (where '\' character corresponds to the value of winbind separator parameter). It is also possible to use a UPN in the form user@REALM or group@REALM. pam_winbind will, in that case, lookup the SID internally. Note that NAME may not contain any spaces. It is thus recommended to only use SIDs. You can verify the list of SIDs a user is a member of with wbinfo --user-sids=SID.

This option must only be specified on a auth module declaration, as it only operates in conjunction with password authentication.

use_first_pass

By default, pam_winbind tries to get the authentication token from a previous module. If no token is available it asks the user for the old password. With this option, pam_winbind aborts with an error if no authentication token from a previous module is available.

try_first_pass

Same as the use_first_pass option (previous item), except that if the primary password is not valid, PAM will prompt for a password.

use_authtok

Set the new password to the one provided by the previously stacked password module. If this option is not set pam_winbind will ask the user for the new password.

try_authtok

Same as the use_authtok option (previous item), except that if the new password is not valid, PAM will prompt for a password.

krb5_auth

pam_winbind can authenticate using Kerberos when winbindd is talking to an Active Directory domain controller. Kerberos authentication must be enabled with this parameter. When Kerberos authentication can not succeed (e.g. due to clock skew), winbindd will fallback to samlogon authentication over MSRPC. When this parameter is used in conjunction with winbind refresh tickets, winbind will keep your Ticket Granting Ticket (TGT) up-to-date by refreshing it whenever necessary.

krb5_ccache_type=[type]

When pam_winbind is configured to try kerberos authentication by enabling the krb5_auth option, it can store the retrieved Ticket Granting Ticket (TGT) in a credential cache. The type of credential cache can be controlled with this option. The supported values are: KCM or KEYRING (when supported by the system's Kerberos library and operating system), FILE and DIR (when the DIR type is supported by the system's Kerberos library). In case of FILE a credential cache in the form of /tmp/krb5cc_UID will be created - in case of DIR you NEED to specify a directory which must exist, the UID directory will be created in the specified directory. In all cases UID is replaced with the numeric user id. Check the details of the Kerberos implementation.

When using the KEYRING type, the supported mechanism is KEYRING:persistent:UID, which uses the Linux kernel keyring to store credentials on a per-UID basis. KEYRING has limitations. For example, it is secure kernel memory, so bulk storage of credentials is not possible.

When using the KCM type, the supported mechanism is KCM:UID, which uses a Kerberos credential manager to store credentials on a per-UID basis similar to KEYRING. This is the recommended choice on latest Linux distributions that offer a Kerberos Credential Manager. If not, we suggest to use KEYRING, as those are the most secure and predictable method.

It is also possible to define custom filepaths and use the "%u" pattern in order to substitute the numeric user id. Examples:

krb5_ccache_type = DIR:/run/user/%u/krb5cc

This will create a credential cache file in the specified directory.

krb5_ccache_type = FILE:/tmp/krb5cc_%u

This will create a credential cache file.

Leave empty to just do kerberos authentication without having a ticket cache after the logon has succeeded. This setting is empty by default.

cached_login

Winbind allows one to logon using cached credentials when winbind offline logon is enabled. To use this feature from the PAM module this option must be set.

silent

Do not emit any messages.

mkhomedir

Create homedirectory for a user on-the-fly, option is valid in PAM session block.

warn_pwd_expire

Defines number of days before pam_winbind starts to warn about passwords that are going to expire. Defaults to 14 days.

PAM DATA EXPORTS

This section describes the data exported in the PAM stack which could be used in other PAM modules.

PAM_WINBIND_HOMEDIR

This is the Windows Home Directory set in the profile tab in the user settings on the Active Directory Server. This could be a local path or a directory on a share mapped to a drive.

PAM_WINBIND_LOGONSCRIPT

The path to the logon script which should be executed if a user logs in. This is normally a relative path to the script stored on the server.

PAM_WINBIND_LOGONSERVER

This exports the Active Directory server we are authenticating against. This can be used as a variable later.

PAM_WINBIND_PROFILEPATH

This is the profile path set in the profile tab in the user settings. Normally the home directory is synced with this directory on a share.

SEE ALSO

pam_winbind.conf(5), wbinfo(1), winbindd(8), smb.conf(5)

VERSION

This man page is part of version 4.17.0pre of Samba.

AUTHOR

The original Samba software and related utilities were created by Andrew Tridgell. Samba is now developed by the Samba Team as an Open Source project similar to the way the Linux kernel is developed.

This manpage was written by Jelmer Vernooij and Guenther Deschner.